MB Flash Whips (RBG)

MB Whips

(No reviews yet) Write a Review
$249.95
Adding to cart… The item has been added

Product Overview

EVERY SIZE IN STOCK @ HENN RACING!

The Flash Synchronized Paired Whips are the absolute top of the line! With tight wrapped, high-output LEDS, combined with innovative features and the smoothest and fastest quick release system available, the Flash stands above the rest! The Flash whips also feature full Bluetooth control via the Pro RGB app AND an RF remote! Now you don't have to choose between app or remote as the Flash gives you both!

 

Want to see the Flash Whip Overview Video on YouTube? Click below!

https://youtu.be/j2i75X5sYQg

​

The Flash series quick release bases are the best on the market for two very simple reasons, they are quick and they are clean. Most synchronized whips on the market require a separate pigtail connection that you have to mess with every time you want to connect your whips, the Flash has evolved beyond that. The innovative Flash whip bases feature all the wiring that the whip needs built inside the base itself. Simply drop the whip on the base and you're 100% ready to go in about a second.

 

Each Flash Whip Pair Includes The Following:

Pair of whips in your selected size

Two premium, triple-stitched MB Whips flags

Two flag mount clamp sets

Two dust caps

Whip controller harness

Remote control

Generic quick install guide

MB Flash Bluetooth enable controller harness will include 3 wires that can be used for street legal integration. The street-legal option will force the left or right whip to blink amber and turn both whips red when the brake is pressed. In order for this function to operate, the associated wires will need to see power only when the blinker or brake light is pressed.

 

2 Foot Whips - Over 150 5050 LEDs Per Whip

3 Foot Whips - Over 250 5050 LEDs Per Whip

4 Foot Whips - Over 350 5050 LEDs Per Whip

5 Foot Whips - Over 450 5050 LEDs Per Whip

 

OPTIONAL WIRING HARNESS AND SWITCH:

Note: This kit does not include a full relay harness with a fuse and a switch. If you do not already have a wiring plan in mind, check out our plug n play wiring harness kit which will give you all the length of wire you need to install this setup, even on a 4 seat machine, and it will also include a relay, fuse and LED Whip switch.

This wiring harness provides all you need to make installation of your MB Whip Lights a breeze. You can simply attach the power and ground lead directly to the battery and run the wire for the switch up to your dash or wherever you want to mount your control switch. This harness includes a relay and several fuse options for different installation needs as well as crimp on spade terminals for the MB Whips controller harness.

The switch will come pre-wired to have both LEDs within the switch completely off when in the "Off" position and both LEDs illuminated when in the "On" position.

Note: The current harnesses have two output leads. This means that one harness can control two circuits with each circuit having its own set of power/ground leads. If you only need a single lead, you can simply tie up the extra set and insolate the power/ground spade terminals.

 

  • MB Whips Warranty

    MB takes customer service and our overall customer experience very seriously.  They pride themselves on having literally no bad experiences with customers.  They know that products are used in rough environments and issues may happen.  However, MB has engineered their products to be strong and resilient even in the harshest environments.  

    They offer a full lifetime warranty against defect or failure of any of the components of our Whips.  They designed these setups to take a beating and keep on running so we're comfortable offering a lifetime warranty.  However, we know accidents can happen.  In the case of damage, MB will offer 50% off the cost of any replacement whips.  Email us directly and we can help get that going for you if it should happen.  

Reviews

(No reviews yet) Write a Review