Product Overview
EVERY COLOR IN STOCK @ HENN RACING!
The MB Whips Radiant Pro series is hands down the brightest whip setups we've ever made. With up to 1600+ LEDs in a single whip, the Radiant Pros can't be missed. You aren't just lighting up your whole camp with this whip, you're lighting up the whole hillside or dune. The Radiant Pro whips are a single color whip with maximum light output in mind. Simply pick you color, and we'll build you the brightest 2 foot whip you've ever seen.
Already have Flash whips and want to add these to your LED Whip options, no problem. The Radiant Pro uses the same bases and controllers as the Flash line so you are already wired and ready.
The Radiant Pro Series Whips are not flexible. These are a very rigid setup, so you will want to mount them under the roofline if you are encountering trees or branches in your riding areas. We do have Springs available that work with this setup, but we would still recommend they be mounted in such a way as to avoid impacts.
Each Radiant Pro Whip Pair Includes The Following:
Pair of Radiant Pro 2ft whips in your specified color
Pair of our powered quick release bases w/bare leads for power
Two premium black MB Whips flags
Two flag mount clamp sets
Two dust caps
OPTIONAL WIRING HARNESS AND SWITCH:
Note: This kit does not include a full relay harness with a fuse and a switch. If you do not already have a wiring plan in mind, check out our plug n play wiring harness kit which will give you all the length of wire you need to install this setup, even on a 4 seat machine, and it will also include a relay, fuse and LED Whip switch.
This wiring harness provides all you need to make installation of your MB Whip Lights a breeze. You can simply attach the power and ground lead directly to the battery and run the wire for the switch up to your dash or wherever you want to mount your control switch. This harness includes a relay and several fuse options for different installation needs as well as crimp on spade terminals for the MB Whips controller harness.
The switch will come pre-wired to have both LEDs within the switch completely off when in the "Off" position and both LEDs illuminated when in the "On" position.
Note: The current harnesses have two output leads. This means that one harness can control two circuits with each circuit having its own set of power/ground leads. If you only need a single lead, you can simply tie up the extra set and insolate the power/ground spade terminals.
-
MB Whips Warranty
MB takes customer service and our overall customer experience very seriously. They pride themselves on having literally no bad experiences with customers. They know that products are used in rough environments and issues may happen. However, MB has engineered their products to be strong and resilient even in the harshest environments.
They offer a full lifetime warranty against defect or failure of any of the components of our Whips. They designed these setups to take a beating and keep on running so we're comfortable offering a lifetime warranty. However, we know accidents can happen. In the case of damage, MB will offer 50% off the cost of any replacement whips. Email us directly and we can help get that going for you if it should happen.
